• A-CPL-HOS-25FS-S81

    MIL-C-24356

    The 2-1/2" female split hose coupling provides a termination for the fueling hose that can be attached to additional couplings, adapters or fittings.

    To be used with aluminum split clamps.

  • Couplings - 2-1/2" Hose, Male Split (Segmental '81™)

    MIL-C-24356

    The 2-1/2" male split hose coupling provides a termination for the fueling hose that can be attached to additional couplings, adapters or fittings.

    To be used with aluminum split clamps.

  • Couplings - 4", 6" & 7" Hose, Female Split (Segmental '81™)

    MIL-C-24356

    The 4", 6", and 7" female split couplings provide a termination for the fueling hose that can be attached to additional couplings, adapters, or fittings.

    To be used with aluminum split clamps.

  • A-CPL-HOS-4MS-S81--3-Items-PIC

    MIL-C-24356

    The 4", 6" and 7" male split hose couplings provide termination for the fueling hose that can be attached to addition couplings, adapters or fittings.

    To be used with aluminum split clamps.

  • CPL-7FS-FC91PIC

    MIL-C-24356

    The 7" female split coupling provides a termination for the fueling hose that can be attached to additional couplings, adapters, or fittings.

    Hydrasearch FC91 couplings can be installed with existing assembly tools for the 7" fueling at sea couplings.

    To be used with aluminum split clamps.

  • CPL-7MS-FC91PIC

    MIL-C-24356

    The 7" male split coupling provides a termination for the fueling hose that can be attached to additional couplings, adapters, or fittings.

    Hydrasearch FC91 couplings can be installed with existing assembly tools for the 7" fueling at sea couplings.

    To be used with aluminum split clamps.

  • Couplings - 7" Receiver Hose, Female

    The 7" female receiver hose coupling is used on 104" standard length receiver hose assemblies.

    To be used with aluminum split clamps.

  • A-CPL-7MS-REC

    The 7" male receiver hose coupling is used on 104" standard length receiver hose assemblies.

    The male receiver coupling is used with the adapter flange (ST-ADP-7FS-8F).

    To be used with aluminum split clamps.

  • Couplings - NATO Breakable Spool (B End)

    The NATO breakable spool "B" end mates with the NATO breakable spool "A" end and is used by the delivery ship when fueling NATO/SEATO ships equipped with the "A" end. The blank flange is installed when the hose is passed to prevent oil from spilling and water from entering the line.

  • ST-CPL-MOD-NATO-B-AFPIC

    The modified NATO breakable spool "B" end is the terminal end fitting for the 6" astern fueling hose assembly. The coupling mates with the NATO breakable spool "A" end attached to the receiving ship.

  • Spool A

    The NATO breakable spool "A" end mates with the NATO breakable spool "B" end and provides a method of quick disconnect during emergency breakaways. A machined groove in the center weakens the spool so it can be broken easily with a blow from a sledge hammer.

  • A-CPLHOS-25-ADPIC

    The 2-1/2" automatic disconnect coupling consists of a coupling body which separates into two halves with closure valves in each to prevent spillage. It is used with the 2-1/2" F.A.S. hose rigs to provide an automatic disconnect with fuel shutoff when tensile loads on the rig exceed 500 pounds.

  • Couplings - 4 inch (in.) Pigtail Hose, Female

    MIL-H-17505

    The female pigtail hose coupling is a built in nipple which is utilized with the 4" pigtail hose assembly.

    Gasket included with assembly.

  • Couplings - 4 inch (in.) Pigtail Hose, Male

    MIL-H-17505

    The male pigtail hose coupling is a built in nipple which is utilized with the 4" pigtail hose assembly.

  • B-CPL-HOS-25-QR--2-Items-

    The quick release coupling consists of a coupling body that separates into two halves when the hand operated releasing handle is activated. The coupling provides a quick release termination for the 4" and 2-1/2" fueling hose.

  • A-CPL-ROB-Q-T-D

    The robb coupling quick trip device is connected to the female half of the robb coupling and provides a faster means of connecting or releasing the robb coupling assembly.

  • Couplings - Robb Body, Female End

    The robb coupling body is the female end of the robb coupling assembly. The robb body connects to the end of the fueling hose sent by the delivery ship and contains a valve to prevent fuel spillage. It mates with the robb male end attached to the fuel riser of the receiving ship.

  • B-CPL-ROB-ME-CG

    The robb coupling nipple is the male end of the robb coupling assembly. The robb nipple connects to the fuel riser on the receiving ship and mates with the robb female end sent by the delivery ship on the end of the fueling hose. A protective cap fits on the nipple when not in use to prevent damage of the male end and contaminants from entering the fuel system.

    Complete Assembly.